Samsung Galaxy S10 Battery Back Glass Cover Replacement and Camera Lens

Samsung Galaxy S10 Battery Back Glass Cover Replacement and Camera Lens

Is your Samsung Galaxy S10 showing signs of wear and tear, particularly on the battery back glass cover and camera lens? Don’t worry; we’ve got you covered! Today, we’re going to show you how to replace these components to give your Galaxy S10 a fresh new look and restore its camera functionality.

Step 1: Purchase the Replacement Parts in eSquareParts

Before you start, you’ll need to purchase replacement parts for your Samsung Galaxy S10. You’ll need a new battery back glass cover and a camera lens cover. These parts are available online and are relatively inexpensive. Make sure to choose parts that are compatible with your specific Galaxy S10 model.

Step 2: Prepare Your Galaxy S10

Start by powering off your Samsung Galaxy S10 and removing the SIM card tray. This will make it easier to access the back glass cover and camera lens. Use a hairdryer or heat gun to gently heat the back of your phone. This will soften the adhesive holding the back glass cover in place.

Step 3: Remove the Back Glass Cover

Once the adhesive is softened, use a pry tool or a thin, flat object to carefully pry off the back glass cover. Work your way around the edges, taking care not to damage the phone’s frame or other components. Once the back glass cover is removed, set it aside.

Step 4: Replace the Battery Back Glass Cover

With the old back glass cover removed, clean the phone’s frame to remove any remaining adhesive or debris. Then, take the new battery back glass cover and carefully align it with the phone’s frame. Press down gently to ensure it is securely in place.

Step 5: Replace the Camera Lens

Next, locate the camera lens cover on the back of your Samsung Galaxy S10. This is a small, round piece of glass covering the camera lens. Use a small screwdriver or pry tool to carefully remove the old camera lens cover. Be sure to handle it with care to avoid scratching or damaging the lens underneath.

Step 6: Install the New Camera Lens

Once the old camera lens cover is removed, clean the camera lens and the surrounding area to remove any dust or debris. Then, take the new camera lens cover and carefully place it over the camera lens. Press down gently to ensure it is securely in place.

Step 7: Test Your Galaxy S10

After replacing the battery back glass cover and camera lens, power on your Samsung Galaxy S10 and test the camera to ensure it is functioning correctly. If everything is working as expected, you’re all set!

Step 8: Enjoy Your Refreshed Galaxy S10

With your Samsung Galaxy S10’s battery back glass cover and camera lens replaced, you can now enjoy a fresh new look and restored camera functionality. This simple repair can breathe new life into your Galaxy S10 and extend its lifespan.

Coupon Samsung Galaxy S10 Battery Back Glass Cover Replacement and Camera Lens

That’s it for this Tech Tips and Tricks Thursday! We hope you found this guide helpful. If you have any questions or suggestions for future topics, feel free to leave a comment below. Stay tuned for more tech tips and tricks next Thursday!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

[]