XY-L30A DC 6-60v 30A Lithium Battery Charging Control Module LCD Display Charger
- 1. Automatic Charge control function:
By setting the volt-HI:‘UP’ volt-LI:‘dn’;When the battery voltage is below the volt-LI:’dn’,the relay leads,the charger begins to charge the battery;when the battery voltage is up to volt-HI:’UP’,the relay is diconnected and the automatic charge is completed once;
- 2. Charge Time Control Function:
How to turn on the time control function?
After entering the parameter set, set the parameter op is non-zero, then turn on the time control function, op default parameter is:–:–h, the default does not turn on time control function;After the opening Time control function (OP is non-zero), when the battery voltage is the lower volt-LI’dn’, the charger began to charge the battery, the system began to clock; During the timing, the battery voltage ≥ volt-HI’UP’, relay disconnect; If the OP time is up, the battery voltage is still the lower volt-LI’dn’, the relay keeps the conduction, automatically closes the charge time control function, and flashes the H:ER to remind the user, the time parameter setting is unreasonable; Press any key to stop flashing;Note: Time format: 00:59 (00 for hours, 59 for minutes) The maximum time is 99:59, which is 100 hours.
- 3. Serial data upload and parameter setting function:
The system supports UART data upload and parameter setting
UART:115200,8,1Cmd Funcon Relays enable to open
off Relays disable to open
start Start data upload
stop Stop data upload
read Read the param setting
dw10.0 Set volt-LI:’dn’
up20.0 Set volt-HI:’UP’
xx:xx Set the charge time OP
00:00 stop charge time
Data Upload message Format:
Battery voltage + battery percent + charge time + charge status 12.0V,020%,00:10,OP
The Key Function Description:
- In the Run interface (main interface):
- Short press SET button to display the current set of parameters; Short press UP button, toggle display charge percentage and charging time;
- Short Press DOWN button, select Turn on/off relay enabling, if the relay can be closed, will show ‘ off ‘ as a reminder;
- Long press UP button, switch low power state
- on:No operation in 10 minutes turn off backlight
- OFF: Backlight is always bright
- Long press SET button,enter the parameter settings.
- 1 x XY-L30A DC 6-60v 30A Lithium Battery Charging Control Module LCD Display Protection Board Charger Time Switch
Instructions are NOT included.
NOTE: *SORRY! PICK UP IS NOT ALLOWED!*
Kindly compare your original item with the photos provided for the listing to make sure that you are purchasing the correct part. Please be informed that we do not hold any responsibility for damages caused by wrong installation or wrong purchase.
If you have any questions or clarifications regarding the item,please don’t hesitate to ask before purchase.
View some ideas here!
Check out the latest Deals now!
There are no reviews yet.